Mrs. Lingerie for the Bride
Give the bride-to-be something unforgettable with cheeky, custom "Mrs." lingerie that brings all the fun energy to her bridal shower or bachelorette party. Think vibrant colors, playful lace boy-shorts, or a silky cami set customized with her new last name in a flashy font. It is the perfect blend of bridal celebration and midnight confidence, guaranteed to make her laugh, blush, and feel like the absolute main character on her honeymoon.
Making these custom Cricut lingerie is a quick, beginner-friendly project!
What You'll Need
- Underwear in various sizes and styles: 100% cotton works best for everyday iron-on.
- Iron-On/HTV: Everyday iron-on or specialty vinyl (like SportFlex for stretchier fabrics).
- Cricut Machine: Any model works (Maker, Explore, or Joy).
- Cutting Mat: StandardGrip or LightGrip.
- Tools: Weeding hook, scissors, and a brayer (to smooth vinyl).
- Heat Source: Cricut EasyPress, household iron, or a heat press.
- Protective Sheet: Teflon sheet or parchment paper.
Preparing & Cutting the Designs
- Open Cricut Design Space and upload theSVG file by clicking the download button.
- Measure the underwear. A good rule of thumb is to make the design around 2-3 inches.
- Click Make It.
- Important: Toggle the Mirror switch to ON. Iron-on vinyl is cut from the back, so your text/images will be backwards if you skip this step.
- Place your HTV on the cutting mat with the shiny side down (the dull side faces up). Load the mat and let your machine cut.
Weeding the Design
- Use your weeding tool to carefully poke and pull away the negative space around your design, leaving only your intended image stuck to the clear, sticky carrier sheet.
- Use scissors to trim away any excess plastic carrier sheet around your design to avoid press marks on the onesie.
Applying the Heat
- Turn on your Cricut EasyPress or heat press. Refer to the official Cricut Heat Guide to find the exact temperature and timing for your specific vinyl and fabric.
- Place a folded towel or an EasyPress Mat inside the onesie. This raises the main fabric slightly above the thick seams, ensuring even pressure.
- Pre-press the onesie for 10-15 seconds to remove wrinkles and moisture.
- Center your vinyl design on the onesie, about an inch down from the collar.
- Cover the design with a Teflon sheet or parchment paper. Press firmly with your heat source for the recommended time (usually about 30 seconds at 315°F for cotton).
- Flip the onesie over and press the back of the design for another 10–15 seconds to firmly set the adhesive.
- Let the carrier sheet cool to the touch (cold peel), then slowly peel it away at a 45-degree angle
Leave a Reply